Description
OSE assembled .250 (1/4″) cable to 1/4″ propeller shaft w/stepped down shaft end for 3/16″ (.187) Propellers. This item can be used with the 1/4 struts but has the ability to use the smaller 3/16″ props for better tuning.
This shaft can be used with 3/16″ drive dog-style props.
Specs:
Flex Cable diameter: 1/4 (.250″, 6.35mm)
Assembled length: 32″ (800mm)
Specs of the prop shaft, see picture 2
Shaft total length: 4.25″ (108mm)
Propeller shaft diameter: 3/16″ (4.75mm)
Propeller shaft length: 1.75″ (44.4mm)
Requires:
Drive Dog 3/16″ or for large hub props you can put on a 1/4″ drive dog on the 1/4″ section.
Prop nut with 10-32 thread.
Teflon tubing 1/4″ size.
These assemblies require the customer to cut the cable to its required length.
Note:
The OSE listed length is the total assembled length. Measured from the end of the cable to the tip of the propeller shaft. Flex cable lengths are approximate. They can be plus or minus one-half inch. These assemblies require the customer to cut the cable to its required length.
Reviews
There are no reviews yet.