Description
BSI Insta-Cure™ (BSI103) is a water-thin cyanoacrylate adhesive that wicks deep into tight joints by capillary action and cures in seconds. It’s the go-to CA for balsa wood construction, where it penetrates the grain to form a bond stronger than a surface-only adhesive ever could.
Surfaces must be tight-fitting and held together while the CA is applied around the seam edges. At cure, CA vapors are released — work in a ventilated area and avoid contact with eyes and nose.
Key Features
- Part Number: BSI103
- Size: 2 oz
- Viscosity: Super thin (water-thin)
- Cure Time: Seconds
- Full Strength: 1 hour
- Wicks into joints by capillary action
- Ideal for balsa wood and tight-fitting joints
- Compatible with BSI Insta-Set™ accelerator for faster cure
Directions
Loosen top to relieve internal pressure, then re-tighten. Remove cap and cut off 1/32″ from tip while holding bottle upright. Hold parts tightly together and apply around seam for instant bonding. Full strength reached in 1 hour.
Reviews
There are no reviews yet.